10m Mobile Scaffold Tower Hire — Double width, 2.5m Platform

Hire a 10m mobile scaffold tower in London from £229.99 a week, delivered free within 30km of our Cheshunt yard and collected at the end of your hire. 10.14m working height on the full-size working platform, 2.5m x 1.35m.

What a 10m tower is for

10.14m takes you past the domestic range into four-storey elevations and roof-level plant. It is the height where a tower stops being something one person throws up in the morning: the build sequence, the stabiliser span and where the tower is tied matter as much as the tower itself, and it wants two trained people on it.

• Four-storey elevations and mansard levels
• Roof-level plant, condensers and flues
• Warehouse racking top runs and service risers
• Signage and cladding above the domestic range

Mostly hired by builders.

Is 10.14m the right height for you?

You stand on the platform at 8.14m and work comfortably to about 10.1m — that reaches a full three-storey elevation including the roofline. Measure to the highest point you actually need to touch and take off roughly two metres; if the number you are left with is near 10.14, this is your tower. Working lower than that? The 8m version works to 8.14m, which reaches the roofline and bargeboards of a two-storey house. Need to go higher? The 12m version works to 12.14m, which reaches four-storey eaves and roof-level plant on a commercial unit.

If you are between two heights, the height guide works through it, and how to choose a scaffold tower covers the rest of the decision.

Will it fit, and can you get it there?

2.5m x 1.35m gives two operatives room to work side by side with materials on the deck. This is the platform for external elevations, commercial sites and anything where you are up there for a full day.

At 1.35m wide it will not go through an internal doorway. It needs open ground for the base and the stabiliser spread — measure before you book if access is through a house or a narrow gate. The size guide covers measuring the narrowest point, the floor area including stabilisers, and the clear height you need while building.

Plan the carry route. 314.1kg of components. Two people minimum, and worth walking the route from where we can park to where the tower goes before delivery day — through a house or down a long side return this is the part that costs time.

Specification

• Working height: 10.14m — the highest point you can comfortably reach
• Platform height: 8.14m — the deck you stand on
• Tower footprint: 2.5m x 1.35m
• Boarded deck: 2.50m x 1.20m
• Tower width: 1350mm
• Tower weight: 314.1kg
• Guardrail system: Standard
• Standard: EN 1004
• Safe working load: on the manufacturer's plate and in the assembly guide supplied with the tower

What is in the load

Every part of this configuration, with the manufacturer's part codes and weights. Worth a count on delivery, and worth a look before you plan the carry.

Part	Qty	Each
MC-2000X1350	8	11.2kg
MC-1000X1350	2	5.9kg
MYTY-2500	8	2.2kg
MCPRZ-2750	16	2.4kg
MKOR-2500X500	2	5kg
MTKR-150	4	4.7kg
MKPLT-2500X600	4	19.3kg
MPLT-2500X600	1	19kg
MPAY-2000	4	4.7kg
MTEK-2500X1350	1	11.3kg
YAYLI PIM	16	0.1kg
Total		314.1kg

What comes with the hire

Guardrails, toeboards and stabilisers included

Every hire ships complete. Guardrails and toeboards are part of the tower rather than an extra line on the invoice, and the stabilisers are sized for the height you booked. Nothing to add at checkout and nothing missing on delivery.

Guardrails are fitted from the level you are standing on, which is the normal method for mobile towers and is what PASMA training covers. If your site specifically requires the guardrail to be fitted from the platform below — usually written into a method statement as AGR — the AGR version of this tower does that, for £20 a week more.

Inspected before it leaves the yard

Frames, braces, platforms, guardrails, toeboards and castors are checked on every turnaround. Anything bent, cracked or worn comes out of service rather than going back on the shelf. See our safety and quality standards.

What the weekly price covers

The figure on this page is what you pay. Guardrails, toeboards, stabilisers and lockable castors come with the tower, not on the invoice — and there is no deposit and no card hold.

• Included: delivery and collection within 30km of our Cheshunt yard
• £45: delivery and collection beyond 30km — both legs, once per order
• Optional: installation and dismantling, if nobody on your team is PASMA trained
• VAT: included in the price shown, never added at checkout

The full line-by-line list — what is in the price and what is not — is in the hire terms.

How this tower goes up

Who may build it: under the Work at Height Regulations 2005 a tower must be assembled by someone competent to do it — in practice, PASMA trained on this type of tower. If nobody on your team holds that, add our optional installation service and we will build it on delivery and take it down at collection.

These are the manufacturer's own assembly diagrams for this configuration. The full guide comes with the tower.

Dismantling is the same sequence in reverse. The assembly guide explains the principle behind the order, and the PASMA guide covers the training.

The manufacturer's limits

From the assembly and use manual supplied with this tower — the manufacturer's figures, not our interpretation of them.

• Wind: stop work above 38 km/h (about 24 mph, Beaufort 6), and never try to move the tower in wind.
• Ground: level, flat and firm. On soft ground put base plates or U-profiles under the castors.
• Assembly: two people minimum, and both trained on this type of tower.
• Stabilisers: required at this height — out to full span before anyone climbs.
• Rest platform: one at least every 4m, so this configuration needs 2 on the way up.
• Moving it: drop the height to 6m first, raise the stabilisers no more than 10cm, and nobody stays on the tower.

Certified to EN 1004. The full set of limits — loading, sheeting, inspection intervals and what the tower must never be used for — is on the safety guide.

Other sizes and configurations

• 8m Mobile Scaffold Tower Hire — Double width, 2.5m Platform — one size down
• 12m Mobile Scaffold Tower Hire — Double width, 2.5m Platform — one size up
• 10m Mobile Scaffold Tower Hire — Single width, 2.5m Platform — same height, 2.5m x 0.75m platform

Or see every size in the range on the mobile scaffold tower hire collection, and the full fleet under scaffold tower hire.

Delivery, collection and hire terms

Delivery and collection are free within 30km of our Cheshunt yard — North and East London, south Hertfordshire and west Essex — and a flat £45 for both legs beyond that. Enter your postcode above and you will see which applies, plus your earliest date and slot, before you pay. See delivery information and every area we cover.

Minimum hire is one week; a single day is charged as one week. The weekly rate drops from four weeks, and 15% comes off automatically when you hire three or more towers on one order. No deposit is held on your card. Full detail in our hire terms.