Hire by trade
Scaffold Tower Hire By Trade
- Five tower families
- 48 configurations
- Free delivery
Working height is the platform height plus about two metres of reach.
Decide in this order
Height is fixed by the job, width is fixed by your access. Everything else comes after.
Height, measured not guessed
Measure to the highest point you need to reach and take off about two metres of arm reach. That figure is the working height to book — not the platform height, and not the model name on the sticker.
- Single-storey soffit or a tall interior ceiling — around 4m
- Two-storey terrace gutter — around 6m
- Roofline on a two-storey house — 7m to 8m
Width, decided by your access
A standard UK internal door is around 762mm. A 750mm platform goes through it; a 1.35m platform does not. If any part of the route is a normal doorway, that settles the width before anything else does.
- 750mm — hallways, side returns, risers, occupied buildings
- 1.35m — two operatives with materials, open ground outside
Build method, only if someone asks
If a method statement specifies advanced guardrail, you need an AGR tower — the guardrail goes in from the level below so nobody stands on an unprotected platform. On domestic work nobody will ask, and a standard tower built correctly is entirely legitimate.
Hire by trade
- BuildersWorking platforms for extensions, refurbishments and general building work across Londo...
- ConstructionSite-compliant access towers for construction projects across London, with advanced gua...
- DecoratorsCompact, quick-to-build towers for domestic and commercial decorating work in London ho...
- DIYHire the same certified towers the trade uses for your own home project — delivered to ...
- ElectriciansNarrow and folding towers for first fix, lighting installs and containment runs in Lond...
- HVAC engineersAccess towers for ductwork, ceiling units, plant room work and commercial ventilation i...
- Maintenance teamsReliable access equipment for planned and reactive maintenance in London blocks, school...
- PaintersStable working platforms for interior and exterior decorating across London — delivered...
- RoofersAccess towers for gutter, fascia, soffit and low-level roof work across London — with g...
Where each trade usually lands
A starting point, not a rule. Your access and your reach decide it.
| Trade | Usual working height | Usual platform | Why |
|---|---|---|---|
| Painters and decorators | 4m to 6m | 750mm | Side returns and hallways decide the width before the height does |
| Electricians | 4m to 6m | 750mm | Occupied buildings, risers and corridors; folding towers for quick calls |
| Builders | 6m to 8m | 1.35m | Two operatives and materials on the deck, usually on open ground |
| Roofers | 6m to 8m | 1.35m | Gutter, fascia and soffit work at the edge — not roof-slope access |
| HVAC engineers | 4m to 10m | Either | Plant rooms are tight, industrial volumes are tall; measure both |
| Maintenance teams | 4m to 6m | 750mm | Several properties a day, so setup time matters more than deck size |
| Construction sites | Varies | Either | Check the RAMS first — advanced guardrail is often specified |
Working heights are the figures we publish on each tower page, not model names. If your job sits between two, take the taller one.